To be able to run E85 you need to increase flow rate to reach the same mixture and air fuel ratio as for Gasoline.
The best way of doing this is by changing the injectors to bigger sized injectors.

Read more...

 



E85 ETHANOL FUEL
OPTMIZED SOFTWARE





 

The software of the engine management system has to be remapped for E85. Fuelmaps is optimized based on the characteristics of E85 and the size of injectors you are using. The ignition timing is also optimized with a more aggressive timing to increase power and drivability.

How to change software to E85 fuel optimized software
In cars buildt around ~1995 or earlier there is stand alone chips/eproms where the software is located in the engine management system controller unit. Then you only need to replace the stock chip with our E85 tuned chip.

In cars buildt later than ~1995 the ECU (Electronic Controller Unit) has to be reprogrammed for E85 fuel. Then you have to send the ECU for reprogramming.

This is what's done in the reprogramming
  • Finetuning of all the fuelcontroller maps. Idle control, partload and full throttle maps.
    This settings is tuned unique due to which injectors you are using.
  • Optimizing the Ignition timings for E85 fuel to increase the power of the engine. Comparing to Gasoline the E85 fuel has a correlative octane level at 104. When ignition timing is opimized, this will also save some fuel.
  • Cold start fix. The coldstart control maps is remapped for E85 fuel so that the car will start normally also when the engine is cold.
     

For more information - Contact us





GUIDE FOR INSTALLING
STAND ALONE CHIPS

        ©  E85ToGo.com  |  Fekzen AB  |  Contact us